Rexroth DKC11.3-040 Product Overview

Rexroth DKC11.3-040 is a high-performance servo drive produced by Rexroth.It is mainly used to control servo motors and achieve high-precision positioning of transmission systems.This servo drive is a high-end product of transmission technology and is widely used in automation equipment such as industrial robots and CNC machining centers.

Main functions

Control mode:Rexroth DKC11.3-040 servo drive supports three modes:position control,speed control and torque control.Through these three methods,precise control of servo motors can be achieved to meet the needs of various application scenarios.

Position control:The drive controls the speed,angle and torque of the motor to achieve high-precision positioning.

Speed​​control:The driver only controls the speed and torque of the motor,and the motor’s rotation angle is controlled by the encoder signal fed back by the CNC driver.

Torque control:The driver only controls the torque of the motor,and the torque output by the motor no longer changes with the load,but only obeys the input torque command.

Drive circuit:The servo driver uses a drive circuit designed with an intelligent power module(IPM)as the core,which integrates the drive circuit and fault detection protection circuit,such as overvoltage,overcurrent,overheating,undervoltage,etc.A soft start circuit is also added to the main circuit to reduce the impact of the startup process on the driver.

Signal processing:Rexroth DKC11.3-040 servo driver uses a digital signal processor(DSP)as the control core,which can implement complex control algorithms and realize digitalization,networking and intelligence.At the same time,it uses an incremental photoelectric encoder as a speed detection sensor,and uses the M/T speed detection method to measure the speed.

Application fields

Rexroth DKC11.3-040 servo drive is widely used in the following fields due to its high precision,high performance,stable and reliable characteristics

CNC machine tools:used to control the cutting feed motion of each coordinate axis of the machine tool and the rotation motion of the spindle,providing the torque and power required for the cutting process.

Industrial robots:As one of the core components of industrial robots,it is used to control the motion trajectory and speed of the robot to achieve precise operation and positioning.

Automated production line:In the automated production line,the servo drive is used to control the movement of various automated equipment to improve production efficiency and product quality.