Bently Nevada 330103-00-16-10-12-RU 3300 XL 8 mm Proximity Probe

The Bently Nevada 330103-00-16-10-12-RU 3300 XL 8 mm Proximity Probe is designed for accurate vibration and position measurement in rotating machinery. It features a rugged stainless-steel case, PPS probe tip, and a fluid-resistant FluidLoc cable with a secure ClickLoc connector. With full compliance to API 670 standards, it provides reliable performance in harsh industrial environments.

Technical Specifications

Applications

• Vibration monitoring in turbines, compressors, and pumps

• Shaft position and displacement measurement

• Keyphasor® or speed sensing in rotating equipment

• Monitoring machinery in humid, fluid-exposed, or hazardous areas

Advantages

• High Reliability: Meets API 670 standards with precise linearity and temperature stability

• Rugged Design: TipLoc™ bonding and CableLoc™ technology ensure mechanical durability

• Fluid Resistance: FluidLoc cable prevents moisture ingress in harsh environments

• Secure Connection: ClickLoc connector prevents loosening under vibration

• Backward Compatibility: Works seamlessly with 3300 series and older systems

• Enhanced EMI/RFI Immunity: Stable readings in electrically noisy environments

FAQ

Q1: What is the sensing range of the 330103-00-16-10-12-RU probe?

A1: The probe operates with a linear sensing range of approximately 2 mm, optimized for 8 mm proximity measurements.

Q2: Can this probe be used with other Bently Nevada proximitor sensors?

A2: Yes, it is fully compatible with 3300 XL Proximitor Sensors and other 3300 series components.

Q3: What is the standard gap setting for installation?

A3: The recommended gap setting is 1.27 mm relative to the AISI 4140 steel target.

Q4: How does the FluidLoc cable improve durability?

A4: FluidLoc construction provides superior resistance to oil, moisture, and chemical ingress.

Q5: Is this probe suitable for hazardous environments?

A5: Yes, the RU certification ensures compliance with regional hazardous area standards.

Q6: What is the maximum operating temperature?

A6: The probe can operate continuously from -35 °C to +177 °C.

Q7: Does this probe require calibration before use?

A7: No, it is factory-calibrated and requires no bench calibration for installation.

Q8: Can it be used as a Keyphasor® probe?

A8: Yes, the probe is designed for both vibration monitoring and Keyphasor® speed applications.

Q9: How strong is the cable attachment?

A9: CableLoc technology ensures pull strength up to 330 N, preventing accidental disconnection.

Q10: Is this probe backward compatible with older 5 mm or 8 mm systems?

A10: Yes, it is backward compatible and interchangeable with earlier Bently Nevada 3300 series probes.